Skip to content

TH1.6 Series

Through hole Tap


  • These spacers can be loaded onto chip mounter.
  • The spacer can be fixed on P.C.B. simply by automatic mounting and reflowing.
  • Can be fit from both part and solder sides.
  • Taping type comes with an adsorption film therefore please remove it by pushing from the opposite side after reflow.
  • The adsorption film can be easily removed with the jig. (P/N: TH-JIG).


Brass (Finish: Tin plating over nickel base)

  • Applicable PCB thickness
    Over t 1.6 (No problem to be used for different thickness.)
  • Please use through hole tap only on through hole board.
    (It is not designed to be used for one-sided board and non-through hole board.)
  • Please use auto-recognition type for automatic mounter.

The material is applicable to the exemption of RoHS Directive. (as of January 2018) ※ 1