Characteristics
■ For power transistors, triadicterminal regulators etc.
■ Reliable due to the excellence in heat-resistance, cold-resistance and chemical-resistance, and can be used during the soldering and cleaning procedure.
■ Can be also used for 5-terminal electronic components.
■ Length outside the standard range as below can be also customized.

Characteristics
■ Best suited for fixing the sub-P.C.B.
■ Can be used for both straight and corner section without mounting hole on P.C.B.
■ Easy to unlock, and to attach and remove the circuit boards.
■ Easy to remove from the chassis and re-usable.

Characteristics
■ HK-series are available to set chip-mounting machine.
■ Packaging is by emboss taping.
■ In case of using normal cream-soldering by reflow, land configuralation is
flat and size more than 1.6 mm × 3.2 mm.
■ Material : Brass
■ Surface treatment : HK-2-G Gold plated on nickel ...

Characteristics
■ HK-series are available to set chip-mounting machine.
■ Suitable for small devices as the size is 2 × 1.25.
■ Packaging is by emboss taping.
■ In case of using normal cream-soldering by reflow, land configuralation is flat and size more than 2 mm × 1.3 mm.
■ Material ...

Characteristics
■ HK-series are available to set chip-mounting machine.
■ Suitable for small devices as the size is extremely small 1.2 × 1.0.
■ Shall be used by oscilloscope hooked inner hole.
■ In case of using normal cream-soldering by reflow, land configuralation is flat and size more than 1.3 mm ...

Characteristics
■ For the horizontal mounting of either φ3 or φ5 LED.
■ The use of a square pin in φ1.6
■ Length outside the standard range indicated below can be also customized.
(Please contact us for further information.)

Characteristics
Prevent the LED from tipping, and the light from dissipation.
■ Best suited for the LED with the shaped wire.
■ LF series for φ3 LED.
■ LF5-9.2 for φ5 LED.

Characteristics
■ For two-color LED.
■ LEDs can be mounted in either of two ways; the central ellipse can be used in a lengthwise orientation (shown in Fig.1) or in crosswise orientation. shown in Fig.2)
■ Length outside the standard range indicated below can be also customized.
(Please contact us ...

Characteristics
■ For φ5 LED.
■ Improved for the protection and insulation character of wire, also
prevention from tipping.
■ Length outside the standard range indicated below can be also customized.
(Please contact us for further information.)

Characteristics
■ For φ5 LED.
■ Projection on the circumference will prevent from tipping over.
■ With either the outside groove shown in fig. 1 or the hole shown in Fig.2, this spacer can be used.
■ Length outside the standard range indicated below can be also customized.
(Please contact ...

Characteristics
■ For φ3 LED.
■ Length outside the standard range indicated below can be also customized.
(Please contact us for further information.)